Padlock with key and code full#
Padlock with key and code code#
Padlock with key and code crack#

Key codes are made up of characters that have both letters and numbers. This article discusses the various types of key coders that are commonly used in the locksmith service industry. Even though it is not an easy process, it is systematic and locksmiths have clues that help them to craft the right key for locks.

Padlock with key and code code#

As you rotate the dial the last remaining digit needed for the code will match up with the other two you had previously figured out and the shackle should open.The creation of keys by locksmiths looks like magic to most people.

Padlock with key and code full#

All you will need to do now is keep constant pressure on the lock and slowly twist the remaining dial in a full rotation. If you have a three digit combination lock like what I have demonstrated with, you should now only have one more dial to figure out. Repeat the same process you used on the first dial until you have figured out the second digit of your code (in my case it was '1'). Once again rotate each of the remaining dials to find which is the hardest to rotate (in my case it was dial 'B'). If it continues to make a 'click' sound on the same number every rotation then you have successfully figured out the first digit of the code and you can now move onto figuring out the next dial. Check the dial and make a note of the number that it 'clicked' on then continue to gradually rotate that same dial to double-check (in my case dial 'C' was the hardest to rotate and it 'clicked' on '7'). Start to gradually rotate the dial that is the until you hear a resounding 'click' and feel the shackle move upwards slightly. If the lock is locked onto a solid object such as a gate or a door then a length of rope most likely won't be necessary as having it locked onto something gives you more control and grip thus meaning you will be able to complete the whole procedure with just your bare hands.

When you feel the shackle move upwards slightly and release a 'click' you can move on to the next dial and repeat the procedure until all the dials on the lock have been completed and the lock has been cracked. Being able to apply strong even force on the shackle is vital in order to put a greater amount of friction on the locks dials so that when a dial is turned to the correct number it will result in a resounding 'click' and a slight upward movement of the shackle.

Padlock with key and code crack#

A good grip is necessary because in order to crack the lock you will need to apply a strong and even upwards force on the shackle throughout the entire procedure and this can be difficult to obtain with just bare hands. When picking/cracking a combination lock a length of rope can be used to create a makeshift handle to give you a better grip of the lock. When the dials are moved or jumbled, the keyholes become dis-aligned and the toothed pin cannot be removed and is therefore locked in place. When correct code (in this case 9-2-4) is entered the keyholes of all the dials on the lock become aligned and toothed pin (second picture) can be inserted.

A combination lock (using a bike lock as an example as shown in the pictures above) has three or more dials with a keyhole through the centre of them.